Issue of Universum: Technical Sciences 3(84)
The issue was published on March 25, 2021.
DOI - 10.32743/UniTech.2021.84.3-1
DOI - 10.32743/UniTech.2021.84.3-2
DOI - 10.32743/UniTech.2021.84.3-3
DOI - 10.32743/UniTech.2021.84.3-4
Download the magazine, part 1 (.pdf)
Download the magazine, part 2 (.pdf)
Download the magazine, part 3 (.pdf)
Download the magazine, part 4 (.pdf)
The journal is posted on the website eLIBRARY.ru
The journal is posted on the website eLIBRARY.ru
Issue Articles
Improving the efficiency of sheet material separation by reducing the tool burn-in time
19.03.2021
684
Determine a cost-effective and efficient way to restore the working bodies of mills used in tillage
12.03.2021
675
Technology of production of steel wheels of cars and shortcomings in their production
12.03.2021
972
Analysis of problems of the pneumatic-mechanical spinning method and directions of its further development
06.03.2021
1243
The influence of elastic coupling parameters on the movement of the rocker arm of the crank-rocker mechanism
17.03.2021
1113
Ensuring reliable performance of compression ring
09.03.2021
680
Forecasting gold minering to depth in the Sarmich deposits
11.03.2021
988
Choosing an optimal absorbent for purification of hydrogen-fluoride gas in a rotary filter device and research the effectiveness of the device
16.03.2021
1006
Improvement of the gaslift method of operation of gas condensate wells at the final stage of field development
15.03.2021
1129
Assessment of weight efficiency of the propeller shaft made of composite material compared to the propeller shaft of steel
19.03.2021
933
Detection of unauthorized access attempts based on identification of non-standard behavioral factors
02.03.2021
796
Mathematical interpretation of a queuing
14.03.2021
504
Life cycle management of a new product
19.03.2021
736
Heat technical calculation of heat and humidity air treatment systems in heating houses with a water air solar collector
15.03.2021
1470
Energy saving in the electric drive
11.03.2021
2040
Application of solar concentrators for the reception of opposite fuel through heliopyrolyse device
06.03.2021
950
Improvement of physical and mechanical properties of plastic parts used in machine building
21.03.2021
991
Cutting composite tool material based on bonding joints of B-N-Ti-Al system for clean wrapping of railway parts
06.03.2021
849
Extraction of iron concentrate from gold-containing tail pulpes of hydrometallurgical production
19.03.2021
1063
Processing of vermiculite ore of the Karauzyak deposit of the Republic of Karakalpakistan
19.03.2021
1162
Synthesis and IR-spectral analysis of guanidine nitrate based on local raw materials
18.03.2021
1166
Studying the diagram of the solubility of the calcium chlorate -4-amino-1,2,4-triazole-water system
17.03.2021
724
Influence of the composition and content of clay minerals on the washing efficiency of soap-like substances
15.03.2021
832
Study of the chloride ions action in the process of sorption and desorption of uranium
05.03.2021
881
Influence of NaOH concentration and excess of alkali on the composition of the product during refining of cotton, soy bean, sunflower oil
03.03.2021
2573
Biological activity of synthesized compounds of N, N-polymethylene bis [(no-aromatylo-cycloalkanoloilo) carbamates]
02.03.2021
665
Preparation of productive solutions of borehole underground leaching for sorption of uranium
12.03.2021
1350
Studying local rapeseed oil for food purpose
13.03.2021
2010
Conducting ecologically adsorptive purification of MEA-solution from resins and other hazardous impurities
15.03.2021
1075
The importance of sunflower oil in the human body and improvement of the deodoration process
02.03.2021
2199
To study the importance of safflower oil in the human body and the hydrogenation process
24.02.2021
1661
Germinated grains of wheat – the basis of vitamins and nutrients
18.03.2021
2865
Study of the influence of the damage of grinding and heat treatment on polyphenolic complexes of apple and carrot secondary raw materials
15.03.2021
1309
Specific aspects of food production
05.03.2021
1159
Development of a technology for producing juices from stalks of different grades of sugar sorgo and research of the chemical composition
10.03.2021
1565
Optimization of monitoring conditions and development of a thermocatalytic sensor for CO and gasoline vapors in transport emissions
10.03.2021
589
Prospects for the use of hydrogen fuel in cars
26.02.2021
1103
Determination of activity and selectivity of catalysts in oxidation of exhaust gas components
10.03.2021
737
The impact of the object on the acoustic mode territories
25.02.2021
2005
Robots and manipulators in the automotive industry
20.03.2021
1200