Issue of Universum: Technical Sciences No. 12 (69)
The issue was published on December 25, 2019.
DOI - 10.32743/UniTech.2019.69.12-1
DOI - 10.32743/UniTech.2019.69.12-2
DOI - 10.32743/UniTech.2019.69.12-3
Download the magazine, part 1 (.pdf)
Download the magazine, part 2 (.pdf)
Download the magazine, part 3 (.pdf)
The journal is posted on the website eLIBRARY.ru
Issue Articles
Experimental determination of gas flow rate supplied to dust-cleaning plant with contact element operating in satellite vortex mode
20.12.2019
975
To the question of calculating human potential
11.12.2019
1153
Development of the technology and associated device for complex activation of fuel mixture with elements of artificial neural networks
30.11.2019
924
The projective method of composition (synthesis) of functional modules of control computing systems
19.12.2019
1011
Development of technology for extraction of tungsten from dipped tails of SPA JSC “Almalyk MMC”
24.12.2019
1843
Possibility study of high ash coal enrichment from the Angrensky section by the gravitation method
14.12.2019
1908
Study of the characteristic, composition and properties of Angrena kaolin brand AKF-78
17.12.2019
1655
Computer simulation of the equilibrium state of the heat and mass transfer process by pressure in a two-phase system
16.12.2019
931
Development of technology of coking of low-sulfur and high-aromatic raw materials for obtaining coke of anisotropic structure
22.11.2019
2015
Optimal conditions for producing potassium nitrate from raw materials of the Tubegatan deposit
16.12.2019
1456
Development of methods for cleaning etheroaldehyde fraction in order to obtain technical ethyl alcohol
14.12.2019
5074
Research of synthesis of superplasticizer on a basis naphtha and its influence on physicomechanical properties cement compositions
13.12.2019
1114
Study of the degree of clarification and filterability of the suspension in the obtaining of zinc chloride
10.12.2019
1154
Technological line for producing natural polysaccharides – chitina and chitozan Bombyx mori
05.12.2019
2537
Physical and mechanical properties of printed cotton fabrics with a thickener based on modified starch and carboxymethylcellulose and sericin
25.11.2019
1679
Peculiarities of composition and properties of saflor soappost, determining areas of its application
11.12.2019
1460
Synthesis and research of properties of glass on Uzunbulak I
12.12.2019
1033
Innovative approach to teaching the course "Chemistry" in the direction "Food technology"
14.12.2019
1080
Refining food hydrogenated fats obtained from cottonseed oil with sodium silicate solution
16.12.2019
1169
Heat exchange at heating NH2COONH4 solutions in a heat exchanger with high performance pipes
24.12.2019
975
Tensosensitivity of semiconductor films with small and deep impurities under temperature with liquid helium
18.12.2019
1425
The result of experiments on the application of auger bucket
25.11.2019
763
The genesis of the desert-sandy soils in Central Fergana
21.12.2019
1565
Analysis of exploitation of 3TE10M diesel locomotives on Kattakurgan – Navoi of Uzbek railway section
26.11.2019
892
Transportation work of 3VL80s electric locomotives on Kattakurgan – Navoi section of «Uzbekistan railways» JSC
26.11.2019
930
Condition of fence sleepers causes of uneven distribution of longitudinal stresses in the rail lash
16.12.2019
3295
Advantages of transition into a gas engine fuel
21.12.2019
3041
Production technology of wood and plastic composite slabby materials based on fillers from cotton stains
18.12.2019
1534
The problem of ecology in the disposal of construction materials on the example of the intensification of construction in Uzbekistan
14.12.2019
2955
Creation of stents’ classificator
20.12.2019
2010