Hardware and software design of the method for determining surface roughness using speckles

This article is available in Russian only.

Marshalov Oleg Mikriukov Andrey Vasilyev Evgeniy

23.07.2015 2371

No. 7 (19)

08. Instrumentation, metrology and information-measuring devices and systems

Цитировать:

Маршалов О.В., Микрюков А.А., Васильев Е.Д. Аппаратное и программное оформление метода определения шероховатости поверхности с помощью спеклов // Universum: технические науки : электрон. научн. журн. 2015. № 7 (19). URL: https://7universum.com/en/tech/archive/item/2403 (дата обращения: 29.05.2026).

Прочитать статью:

Keywords: surface roughness, non-contact detection, speckles, image analysis methods

АННОТАЦИЯ

Рассматривается новое устройство для автоматизированного бесконтактного определения шероховатости произвольной поверхности с помощью оптических спеклов. Подробно описываются аппаратная и программная части устройства.

ABSTRACT

The new device for automated non-contact determining of surface roughness using optical speckles is considered. The hardware and software of the device are described in detail.

Список литературы:

1.   Электронный учебник по методу glcm. / [Электронный ресурс]. — Режим доступа: http://www.fp.ucalgary.ca/mhallbey/the_glcm.htm / (дата обращения 07.07.2015).
2.   Abdiel Pino. Measure of roughness of paper using speckle / Abdiel Pino, Josep Pladellorens // Optical Inspection and Metrology for Non-Optics Industries / edited by Peisen S. Huang, Toru Yoshizawa, Kevin G. Harding: Proceedings of SPIE, 3—4 August 2009, San Diego, California, United States. — Vol. 7432. P. 74320E
3.   Félix Salazar. Surface Roughness Measurement on a Wing Aircraft by Speckle Correlation / Félix Salazar, Alberto Barrientos // Sensors. — 2013. — Vol. 13. — P. 11772—11781.
4.   Skin Roughness Assessment / Lioudmila Tchvialeva, Haishan Zeng, Igor Markhvida, David I McLean, Harvey Lui and Tim K Lee // New Developments in Biomedical Engineering / Edited by Domenico Campolo. — Rijeka: InTech. — 2010. — P. 341—358 (Croatia) (Available from: http://www.intechopen.com/books/new-developments-in-biomedicalengineering/skin-roughness-assessment.)
5.   Utilization of optical methods for determinatione of surface properties / Jan Valíček, Miloslav Ohlídal, Milan Držík, Vilém Mádr // METAL: 10th International Metallurgical & Material Conference, 15—17 May 2001, Ostrava, Czech Republic. —2001 (CD-ROM).

Информация об авторах

Marshalov Oleg

Candidate of Engineering Sciences, associate professor of the Department of Physics, branch of South Ural State University in Zlatoust, Russia, Zlatoust

Mikriukov Andrey

Assistant of the «Engineering Technology, Machines and Tools» Department, South Ural State University, Zlatoust branch, Russia, Zlatoust

Vasilyev Evgeniy

A 3rd year student, South Ural State University, Zlatoust branch, Russia, Zlatoust